T-shaped valve body has a barrage inside which is tangent to the internal contour line of the main channel,in a proper angle so
that media can be discharged automatically and there is basically no retention.Preferably ,T-shaped body is welded ,in an annular
way,vertically into the outlet of the main channel.The position ensures that the media can be easily drained.T-shaped body can
aslo be applied in main loops,such as the sampling channel of DN50/DN15 sampling valve and the welded elbow of U-shaped
three-way diaphragm(can be used for cleaning)
The cavity is molded into a whole body,with dead corners smaller than 1D.Being compac in design,when set up in a specific angle,
the valve can achieve the maximum effect in drainage.
Suitable for inert and corrosive liquid and gaseous media
Technical Parameters: | ||
Operation | Manual/Pneumatic | |
DN | DN15-DN100 | |
Body Material | ASTM A351:CF3M | ASTM A182:F316L 904L 2205 2507 |
ASTM B564:C276 C22 | GB/T 2965 TA2 TA10 | |
Cap and Core Material | ASTM A351 CF8 | |
Connection | Welded、Clamped &Flange | |
Operation Pressure | DN15-DN100 PN10bar AISI:145psi | |
Operation Temperature | Dependent on diaphragm materials | |
Diaphragm Material | EPDM;EPDM+PTFE;EPDM/PTFE | |
Medium-contacting inner surface roughness:≤Ra0.4um ≤Ra0.25um |