澳门8159网站(中国)有限公司

Products

Professional development, design, production and sales of ASME-BPE, high-end
Pipe fittings, valves, aseptic diaphragm valves, aseptic tank bottom valves and other high-end products

Products

Professional development, design, production and sales of ASME-BPE, high-end
Pipe fittings, valves, aseptic diaphragm valves, aseptic tank bottom valves and other high-end products

Products

Click to select »

Diaphragm Valve

Butterfly valve

Ball valve

Angle Seat Valve

Pipe Fitting

Other Valves

Thin ball valve (Q05.1B)

Widely applied in pharmaceutical,biological and semi-conductor engineering industries to control feeding in the feeding mouth of reactors.

To transfer the fluids with viscous or particulate matters.

Easy and quick to assemble and disassemble the valve,making it easier to be opened and maintained,decreasing the production downtime.Compact structure.

The drainage outlet can be washed cyclically.Support CIP and SIP inside the cavity.

Characteristic

1.Blow-out proof stem adds safety and reliability to the full extent.
2.Thickened stem packing;V-shaped stacking design;Adjustable self-compensating gland.
3.Anti-static stems are also available for specific working conditions.
4. 3A/ISO sanitary clamp.Structure is reinforced.
5.No residue design.
6.The fluid-contacting surface is self-draining and sanitary.
7.Equipped with a dust cap(with a handle).After feeding is completed, close the dustcap immediately to prevent any foreign matter falling into the reactor.
8.A manual turbine is available,significantly decreasing the operating torque.
9.Equipped with a explosion-proof transponder. According to on-site environment,explosion suppression type or intrinsically safe explosion-proof type can be wiselyprovided.
10.All sealing materials contacting with fluids are reinforced PTFE, in accordance withFDA177.1550 and GMP standards.
11.Support CIP(Clean-In-Place) and SIP(Sterilization-In-Place).

Technical Parameter

Number	Name	Material
1	Valve body	SS/HC/Ti
2	Manual turbine	CF8
3	Ball Core	SS/HC/Ti
4	Valve Stem	SS/HC/Ti
5	shim	PTFE
6	V-seal components	PTFE
7	Pressing Plate	304
8	Gasket	304

Number	Name	Material
9	High voltage clamp	CF8
10	Sealing gasket	PTFE
11	Seats	PTFE
12	Valve cap	SS/HC/Ti
13	Sealing gasket	PTFE
14	Clamp	CF8
15	Blind plate	SS/HC/Ti
16	Explosion-proof retumer	AL

Note:The material of each part may be different under different working conditions.The specific materialshall prevail.

TechnicalParameters
Actuatior	turbine stem,aluminum pneumatic actuator(single/double acting),electric actuator
Size	DN80-DN300
Body	Feeding valve body
Fluid-Contacting Surface	SS/HC/Ti
Non-Fluid-Contacting Surface	SS
Connection	Flange+weld
Operation Pressure	DN80-DN300 PN16bar~PN63bar
Operation Temperature	Dependent on sealmaterials
Fluid-contacting surface roughness:≤Ra0.6μm≤Ra0.25μm
External surface roughness:Ra≤0.8 μm以及≤0.4μm