澳门8159网站(中国)有限公司

T-shaped valve body has a barrage inside which is tangent to the internal contour line of the main channel,in a proper angle so 

that media can be discharged automatically and there is basically no retention.Preferably ,T-shaped body is welded ,in an annular

way,vertically into the outlet of the main channel.The position ensures that the media can be easily drained.T-shaped body can 

aslo be applied in main loops,such as the sampling channel of DN50/DN15 sampling valve and the welded elbow of U-shaped

three-way diaphragm(can be used for cleaning)

The cavity is molded into a whole body,with dead corners smaller than 1D.Being compac in design,when set up in a specific angle,

the valve can achieve the maximum effect in drainage.

Suitable for inert and corrosive liquid and gaseous media

• Support CIP/SIP.Drainage ,cleaning and sterilization effect is optimized
• Impact design,suitable for installation in confined spaces
• The plastic handwheel is resistant to high temperature and prevents burns.